Material and Use of Swirl Air Pump



Detection methods for high pressure blower of swirl air pump in use:

1. Check the fastening condition of each part and whether the positioning pin is loosened.

2. There is no oil leakage inside the blower body.

3. There should be no scaling, rusting and peeling phenomena inside the blower body.

4. Pay attention to whether the lubrication and heat dissipation are normal, pay attention to the quality of lubricating oil, often listen to the noise of blower operation, pay attention to whether the unit is operating under non-conforming conditions, and pay attention to adding butter regularly.

5. The overload of the blower sometimes does not show immediately, so we should pay attention to the increasing trend of the intake and exhaust pressure, bearing temperature and motor current to judge whether the machine is running normally.

6. Before disassembling the machine, it is necessary to measure and record the dimensions of the machine and mark the parts to ensure that the original matching requirements are maintained after assembly.